Standard Ergonomic Tilt Top Light Table Features…

• Mobile Ergonomic Table – Height Adjustable with Hydraulic Lift System
  • Hydraulic Height Adjustment w/ Electric Motor or Hand Crank
    • 1,000 pound capacity lift system – 4 Leg Unit (Less Weight of Unit)
      • Optional 1,500 pound capacity lift system available w/ electric motor – 4 & 6 Leg Unit (Less Weight of Unit)
      • Optional 2,000 & 3,000 pound capacity lift system options available w/ electric motor – 8 Leg Unit (Less Weight of Unit)
    • Hand Crank is mounted below work surface (Front or Side)
    • Switch for Optional Electric Motor Unit can be positioned anywhere on the unit…
    • UL Approved – Lift Systems with Electric Motors are UL listed (Required for Units w/ Electrical Components).
    • CSA approved – Lift Systems with Electric Motors are CSA Certified (Required for Units w/ Electrical Components).
    • – Non-Toxic, Food-Grade Hydraulic Fluid for above systems…
• Tilt Top is available in the following configurations:
  • Manual Adjustment Support Brackets (50-100 lb max. load recommended)
  • Hydraulic Tilt with Manual Hand Crank (Standard 250 lb capacity up to 500 lb)
  • Hydraulic Tilt with Electric Motor (Same weight capacity as above…)
• Industrial-Duty Total-Locking Casters (Pivot & Wheel)
• Other Styles Available – See Our Adjustable Height Tables  page…
  • Manually-Adjusted Height Option w/ Leg Pins – See Table Model A-109P-PIN
  • Also See Our Laboratory Tables page…
• Standard Sizes:
  • We are the manufacturer…
  • Feel free to specify your custom dimension requirements below or choose from the following…
  • “A” – WIDTH (Right-to-Left) 30″, 36″, 48″, 60″, 72″, & 96″
    • Minimum Top/Unit Widths (to Accommodate Hydraulic System):
      • Electric Motor Hydraulic System:
        • 6″ Lift – 28″ Min. Width
        • 8″ Lift – 30″ Min. Width
        • 10″ Lift – 32″ Min. Width
        • 12″ Lift – 34″ Min. Width
        • 16″ Lift – 38″ Min. Width
      • Manual Crank Hydraulic System (Min Depth if Hand Crank located at front of Unit):
        • Hand Crank folds beneath work surface…
        • 6″ Lift – 15″ Min. Width or Depth
        • 8″ Lift – 17″ Min. Width or Depth
        • 10″ Lift – 20″ Min. Width or Depth
        • 12″ Lift – 22″ Min. Width or Depth
        • 16″ Lift – 26″ Min. Width or Depth
  • “B” – DEPTH (Front-to-Back) 30″min., 36″, & 48″
  • “C” – HEIGHT Minimum Starting Height – Varies:
    • 6″ Lift System – 16″ Minimum Starting Height
    • 8″ Lift System – 18″ Minimum Starting Height
    • 10″ Lift System – 20″ Minimum Starting Height
    • 12″ Lift System – 22″ Minimum Starting Height
    • 16″ Lift System – 26″ Minimum Starting Height
    • 20″ Lift System – 30″ Minimum Starting Height

The post Table Model <span style="color: #800000;"><strong>A-107P-LT-TILT</strong></span> – Adjustable Height Tilt Top Light Table appeared first on RDM Industrial Products.

Standard Lift / Tilt Table Features…

• Mobile Ergonomic Table – Height Adjustable with Hydraulic Lift System
  • Hydraulic Height Adjustment w/ Electric Motor or Hand Crank
    • 1,000 pound capacity lift system – 4 Leg Unit (Less Weight of Unit)
      • Optional 1,500 pound capacity lift system available w/ electric motor – 4 & 6 Leg Unit (Less Weight of Unit)
      • Optional 2,000 & 3,000 pound capacity lift system options available w/ electric motor – 8 Leg Unit (Less Weight of Unit)
    • Hand Crank is mounted below work surface (Front or Side)
    • Switch for Optional Electric Motor Unit can be positioned anywhere on the unit…
    • UL Approved – Lift Systems with Electric Motors are UL listed (Required for Units w/ Electrical Components).
    • CSA approved – Lift Systems with Electric Motors are CSA Certified (Required for Units w/ Electrical Components).
    • – Non-Toxic, Food-Grade Hydraulic Fluid for above systems…
• Tilt Top is available in the following configurations:
  • Manual Adjustment Support Brackets (50-100 lb max. load recommended)
  • Hydraulic Tilt with Manual Hand Crank (Standard 250 lb capacity up to 500 lb)
  • Hydraulic Tilt with Electric Motor (Same weight capacity as above…)
• Industrial-Duty Total-Locking Casters (Pivot & Wheel)
• Other Styles Available – See Our Adjustable Height Tables  page…
  • Manually-Adjusted Height Option w/ Leg Pins – See Table Model A-109P-PIN
  • Also See Our Laboratory Tables page…
• Standard Sizes:
  • We are the manufacturer…
  • Feel free to specify your custom dimension requirements below or choose from the following…
  • “A” – WIDTH (Right-to-Left) 30″, 36″, 48″, 60″, 72″, & 96″
    • Minimum Top/Unit Widths (to Accommodate Hydraulic System):
      • Electric Motor Hydraulic System:
        • 6″ Lift – 28″ Min. Width
        • 8″ Lift – 30″ Min. Width
        • 10″ Lift – 32″ Min. Width
        • 12″ Lift – 34″ Min. Width
        • 16″ Lift – 38″ Min. Width
      • Manual Crank Hydraulic System (Min Depth if Hand Crank located at front of Unit):
        • Hand Crank folds beneath work surface…
        • 6″ Lift – 15″ Min. Width or Depth
        • 8″ Lift – 17″ Min. Width or Depth
        • 10″ Lift – 20″ Min. Width or Depth
        • 12″ Lift – 22″ Min. Width or Depth
        • 16″ Lift – 26″ Min. Width or Depth
  • “B” – DEPTH (Front-to-Back) 30″min., 36″, & 48″
  • “C” – HEIGHT Minimum Starting Height – Varies:
    • 6″ Lift System – 16″ Minimum Starting Height
    • 8″ Lift System – 18″ Minimum Starting Height
    • 10″ Lift System – 20″ Minimum Starting Height
    • 12″ Lift System – 22″ Minimum Starting Height
    • 16″ Lift System – 26″ Minimum Starting Height
    • 20″ Lift System – 30″ Minimum Starting Height

The post Table Model <span style="color: #800000;"><strong>A-107P-TILT</strong></span> – Tilt Top Lift Table appeared first on RDM Industrial Products.

• Durable Steel Frame Construction w/ Lower Crossmember
• Industrial-Duty Leg Pins
• Industrial-Duty Casters (Wheels for Mobility)
• Standard Sizes:
  • We are the manufacturer – Feel free to specify your custom dimension requirements
    above or choose from the following…
  • “A” – 48″, 60″ & 72″ Width (Right-to-Left)
  • “B” – 18″, 24″, 30″ & 36″ Depth (Front-to-Back)
  • “C” – 30″-42″ (Standard Height Range) – Custom Ranges Possible
• Industrial-Duty Casters (Wheels for Mobility)
• See our Cleanroom Cart Section for Electropolished Stainless Steel Carts…
• Many Top Options to Choose from including Plastic Laminate, Solid Surface, Solid Wood (Butcher Block), Stainless Steel, and More…

This model is part of the RDM Industrial Carts standard models.

The post Cart Model <span style="color: #9900ff;"><strong>MC-109P-PIN</strong></span> <br> – Adjustable-Height Cart with Leg Pins… appeared first on RDM Industrial Products.

Standard Mobile Lift Table Features…

• Mobile Ergonomic Cart- Height Adjustable with Hydraulic Lift System
  • Hydraulic Height Adjustment w/ Electric Motor or Hand Crank
    • 1,000 pound capacity lift system – 4 Leg Unit (Less Weight of Unit)
      • Optional 1,500 pound capacity lift system available w/ electric motor – 4 & 6 Leg Unit (Less Weight of Unit)
      • Optional 2,000 & 3,000 pound capacity lift system options available w/ electric motor – 8 Leg Unit (Less Weight of Unit)
    • Hand Crank is mounted below work surface (Front or Side)
    • Electric Motor available as option:
      • Switch for Optional Electric Motor Unit can be positioned anywhere on the unit…
      • Plug-In …OR… Battery-Powered Options
    • UL Approved – Lift Systems with Electric Motors are UL listed (Required for Units w/ Electrical Components).
    • CSA approved – Lift Systems with Electric Motors are CSA Certified (Required for Units w/ Electrical Components).
    • – Non-Toxic, Food-Grade Hydraulic Fluid for above systems…
• Full-Time Caster Frame allows Cart to be moved while top is in extended position.
• Industrial-Duty Casters with Locking Wheel & Pivot Standard (Other Styles Available)
• Other Lift Cart Styles Available – See Our Adjustable Height Tables  page…
  • Manually-Adjusted Height Option w/ Leg Pins – See Cart Model MC-109P-PIN
  • Also See Our Laboratory Carts page…
• Standard Sizes:
  • We are the manufacturer…
  • Feel free to specify your custom dimension requirements below or choose from the following…
  • “A” – WIDTH (Right-to-Left) 30″, 36″, 48″, 60″, 72″, & 96″
    • Minimum Top/Unit Widths (to Accommodate Hydraulic System):
      • Electric Motor Hydraulic System:
        • 6″ Lift – 28″ Min. Width
        • 8″ Lift – 30″ Min. Width
        • 10″ Lift – 32″ Min. Width
        • 12″ Lift – 34″ Min. Width
        • 16″ Lift – 38″ Min. Width
      • Manual Crank Hydraulic System (Min Depth if Hand Crank located at front of Unit):
        • Hand Crank folds beneath work surface…
        • 6″ Lift – 15″ Min. Width or Depth
        • 8″ Lift – 17″ Min. Width or Depth
        • 10″ Lift – 20″ Min. Width or Depth
        • 12″ Lift – 22″ Min. Width or Depth
        • 16″ Lift – 26″ Min. Width or Depth
  • “B” – DEPTH (Front-to-Back) 24″, 30″, 36″, & 48″
  • “C” – HEIGHT Minimum Starting Height (w/ 3″dia. Casters) – Varies:
    • 6″ Lift System – 21″ Minimum Starting Height
    • 8″ Lift System – 23″ Minimum Starting Height
    • 10″ Lift System – 25″ Minimum Starting Height
    • 12″ Lift System – 27″ Minimum Starting Height
    • 16″ Lift System – 31″ Minimum Starting Height
    • 20″ Lift System – 35″ Minimum Starting Height

The post Cart Model <span style="color: #9900ff;"><strong>MC-107P-FTCSTR</strong></span> – Hydraulic Flat Top Lift Cart w/ Full-Time Casters appeared first on RDM Industrial Products.

Standard Mobile Lift Table Features…

• Mobile Ergonomic Table – Height Adjustable with Hydraulic Lift System
  • Hydraulic Height Adjustment w/ Electric Motor or Hand Crank
    • 1,000 pound capacity lift system – 4 Leg Unit (Less Weight of Unit)
      • Optional 1,500 pound capacity lift system available w/ electric motor – 4 & 6 Leg Unit (Less Weight of Unit)
      • Optional 2,000 & 3,000 pound capacity lift system options available w/ electric motor – 8 Leg Unit (Less Weight of Unit)
    • Hand Crank is mounted below work surface (Front or Side)
    • Switch for Optional Electric Motor Unit can be positioned anywhere on the unit…
    • UL Approved – Lift Systems with Electric Motors are UL listed (Required for Units w/ Electrical Components).
    • CSA approved – Lift Systems with Electric Motors are CSA Certified (Required for Units w/ Electrical Components).
    • – Non-Toxic, Food-Grade Hydraulic Fluid for above systems…
• Full-Time Caster Frame allows table to be moved while top is in extended position.
• Industrial-Duty Casters with Locking Wheel & Pivot Standard (Other Styles Available)
• Other Styles Available – See Our Adjustable Height Tables  page…
  • Manually-Adjusted Height Option w/ Leg Pins – See Table Model A-109P-PIN
  • Also See Our Laboratory Tables page…
• Standard Sizes:
  • We are the manufacturer…
  • Feel free to specify your custom dimension requirements below or choose from the following…
  • “A” – WIDTH (Right-to-Left) 30″, 36″, 48″, 60″, 72″, & 96″
    • Minimum Top/Unit Widths (to Accommodate Hydraulic System):
      • Electric Motor Hydraulic System:
        • 6″ Lift – 28″ Min. Width
        • 8″ Lift – 30″ Min. Width
        • 10″ Lift – 32″ Min. Width
        • 12″ Lift – 34″ Min. Width
        • 16″ Lift – 38″ Min. Width
      • Manual Crank Hydraulic System (Min Depth if Hand Crank located at front of Unit):
        • Hand Crank folds beneath work surface…
        • 6″ Lift – 15″ Min. Width or Depth
        • 8″ Lift – 17″ Min. Width or Depth
        • 10″ Lift – 20″ Min. Width or Depth
        • 12″ Lift – 22″ Min. Width or Depth
        • 16″ Lift – 26″ Min. Width or Depth
  • “B” – DEPTH (Front-to-Back) 24″, 30″, 36″, & 48″
  • “C” – HEIGHT Minimum Starting Height (w/ 3″dia. Casters) – Varies:
    • 6″ Lift System – 21″ Minimum Starting Height
    • 8″ Lift System – 23″ Minimum Starting Height
    • 10″ Lift System – 25″ Minimum Starting Height
    • 12″ Lift System – 27″ Minimum Starting Height
    • 16″ Lift System – 31″ Minimum Starting Height
    • 20″ Lift System – 35″ Minimum Starting Height

The post Table Model <span style="color: #800000;"><strong>A-107P-FTCSTR</strong></span> – Hydraulic Flat Top Lift Table w/ Full-Time Casters appeared first on RDM Industrial Products.

Standard Mobile Lift Table Features…

• Mobile Ergonomic Table – Height Adjustable with Hydraulic Lift System
  • Hydraulic Height Adjustment w/ Electric Motor or Hand Crank
    • 1,000 pound capacity lift system – 4 Leg Unit (Less Weight of Unit)
      • Optional 1,500 pound capacity lift system available w/ electric motor – 4 & 6 Leg Unit (Less Weight of Unit)
      • Optional 2,000 & 3,000 pound capacity lift system options available w/ electric motor – 8 Leg Unit (Less Weight of Unit)
    • Hand Crank is mounted below work surface (Front or Side)
    • Switch for Optional Electric Motor Unit can be positioned anywhere on the unit…
    • UL Approved – Lift Systems with Electric Motors are UL listed (Required for Units w/ Electrical Components).
    • CSA approved – Lift Systems with Electric Motors are CSA Certified (Required for Units w/ Electrical Components).
    • – Non-Toxic, Food-Grade Hydraulic Fluid for above systems…
• Part-Time Caster Frame allows table to be Stopped/Immobile while top is in extended position.
• Industrial-Duty Total-Locking Casters (Pivot & Wheel)
• Other Styles Available – See Our Adjustable Height Tables  page…
  • Manually-Adjusted Height Option w/ Leg Pins – See Table Model A-109P-PIN
  • Also See Our Laboratory Tables page…
• Standard Sizes:
  • We are the manufacturer…
  • Feel free to specify your custom dimension requirements below or choose from the following…
  • “A” – WIDTH (Right-to-Left) 30″, 36″, 48″, 60″, 72″, & 96″
    • Minimum Top/Unit Widths (to Accommodate Hydraulic System):
      • Electric Motor Hydraulic System:
        • 6″ Lift – 28″ Min. Width
        • 8″ Lift – 30″ Min. Width
        • 10″ Lift – 32″ Min. Width
        • 12″ Lift – 34″ Min. Width
        • 16″ Lift – 38″ Min. Width
      • Manual Crank Hydraulic System (Min Depth if Hand Crank located at front of Unit):
        • Hand Crank folds beneath work surface…
        • 6″ Lift – 15″ Min. Width or Depth
        • 8″ Lift – 17″ Min. Width or Depth
        • 10″ Lift – 20″ Min. Width or Depth
        • 12″ Lift – 22″ Min. Width or Depth
        • 16″ Lift – 26″ Min. Width or Depth
  • “B” – DEPTH (Front-to-Back) 30″min., 36″, & 48″
  • “C” – HEIGHT Minimum Starting Height – Varies:
    • 6″ Lift System – 16″ Minimum Starting Height
    • 8″ Lift System – 18″ Minimum Starting Height
    • 10″ Lift System – 20″ Minimum Starting Height
    • 12″ Lift System – 22″ Minimum Starting Height
    • 16″ Lift System – 26″ Minimum Starting Height
    • 20″ Lift System – 30″ Minimum Starting Height

The post Table Model <span style="color: #800000;"><strong>A-107P-PTCSTR</strong></span> – Hydraulic Flat Top Lift Table w/ Part-Time Casters appeared first on RDM Industrial Products.

Standard Adjustable-Height Cart Features…

• Part-Time Casters allow unit to be Anchored / Stationary while in Lift Mode
• Ergonomic Cart- Height Adjustable with Hydraulic Lift System
  • Hydraulic Height Adjustment w/ Electric Motor or Hand Crank
    • 1,000 pound capacity lift system – 4 Leg Unit (Less Weight of Unit)
      • Optional 1,500 pound capacity lift system available w/ electric motor – 4 & 6 Leg Unit (Less Weight of Unit)
      • Optional 2,000 & 3,000 pound capacity lift system options available w/ electric motor – 8 Leg Unit (Less Weight of Unit)
    • Hand Crank is mounted below work surface (Front or Side)
    • Switch for Optional Electric Motor Unit can be positioned anywhere on the unit…
    • UL Approved – Lift Systems with Electric Motors are UL listed (Required for Units w/ Electrical Components).
    • CSA approved – Lift Systems with Electric Motors are CSA Certified (Required for Units w/ Electrical Components).
    • – Non-Toxic, Food-Grade Hydraulic Fluid for above systems…
• Other Styles Available – See Our Adjustable Height Carts  page…
  • Also See Our Laboratory Carts page…
• Standard Sizes:
  • We are the manufacturer…
  • Feel free to specify your custom dimension requirements below or choose from the following…
  • “A” – WIDTH (Right-to-Left) 18″, 24″, 30″, 36″, 48″, 60″, 72″, & 96″
    • Minimum Top/Unit Widths (to Accommodate Hydraulic System):
      • Electric Motor Hydraulic System:
        • 6″ Lift – 28″ Min. Width
        • 8″ Lift – 30″ Min. Width
        • 10″ Lift – 32″ Min. Width
        • 12″ Lift – 34″ Min. Width
        • 16″ Lift – 38″ Min. Width
      • Manual Crank Hydraulic System (Min Depth if Hand Crank located at front of Unit):
        • Hand Crank folds beneath work surface…
        • 6″ Lift – 15″ Min. Width or Depth
        • 8″ Lift – 17″ Min. Width or Depth
        • 10″ Lift – 20″ Min. Width or Depth
        • 12″ Lift – 22″ Min. Width or Depth
        • 16″ Lift – 26″ Min. Width or Depth
  • “B” – DEPTH (Front-to-Back) 18″, 24″, 30″, 36″, & 48″
  • “C” – HEIGHT Minimum Starting Height – Varies:
    • 6″ Lift System – 16″ Minimum Starting Height
    • 8″ Lift System – 18″ Minimum Starting Height
    • 10″ Lift System – 20″ Minimum Starting Height
    • 12″ Lift System – 22″ Minimum Starting Height
    • 16″ Lift System – 26″ Minimum Starting Height
    • 20″ Lift System – 30″ Minimum Starting Height
• Durable Steel Frame Construction w/ Lower Crossmember (Can be used as a footrest)
  • Welded Tubular Steel Frame Connections
• Adjustable Leveling Feet.  Casters available as option – See below…
• See our Cleanroom Workbench Section for Electropolished Stainless Steel Tables…
• Many Top Options to Choose From, Including Plastic Laminate, Chemical Resistant, ESD / Static-Control, Solid Surface, Solid Wood (Butcher Block), Stainless Steel, and More.

This model is part of the RDM Industrial Workbenches standard models.

The post Cart Model <span style="color: #9900ff;"><strong>MC-107P-PTCSTR</strong></span> – Hydraulic Flat Top Ergo Cart with Part-Time Casters appeared first on RDM Industrial Products.

Standard Cart Features…

• More Costly than our Typical Carbon Steel Frame Construction…
• PART-TIME Industrial-Duty Casters (Wheels for Mobility) – Casters Raise with Frame
  • Table is in Fixed Position when Raised.
  • Leveling Feet glide along floor and must be manually raised (max. 1/2″ clearance) to roll over uneven floor surfaces.
• Ergonomic Height Adjustability (Options)
  • Hydraulic-Assisted Height Adjustment w/ Electric Motor or Hand Crank
    • Hand Crank is mounted below work surface (Front or Side)
    • Switch for Electric Motor Option Unit can be positioned anywhere on the unit…
    • 1,000 pound capacity lift system – 4 Leg Unit (Less Weight of Unit)
    • Optional 1,500 pound capacity lift system available w/ electric motor – 4 & 6 Leg Unit (Less Weight of Unit)
    • Optional 2,000 & 3,000 pound capacity lift system options available w/ electric motor – 8 Leg Unit (Less Weight of Unit)
    •   – Non-Toxic, Food-Grade Hydraulic Fluid for above systems…
    • UL approved – Lift Systems with Electric Motors are UL listed (Required for Units w/ Electrical Components).
    • CSA approved – Lift Systems with Electric Motors are CSA Certified (Required for Units w/ Electrical Components).
  • Manually-Adjusted Height Option w/ Leg Pins – See Table Model MC-109P-SS-PIN
• Durable Stainless Steel Frame Construction w/ Lower Crossmember (Can be used as a footrest)
  • Welded Tubular Steel Frame Connections
  • Type 304 Stainless Steel Construction
  • Type 316 Stainless Steel Construction available as option – Used in highly corrosive environments – More Expensive $$$
• Other Styles Available – See Our Stainless Steel Carts page…
  • Also See Our Adjustable Height Carts  page…
  • Also See Our Laboratory Carts page…
• Many Top Options to Choose From, Including Plastic Laminate, Chemical Resistant, ESD / Static-Control, Solid Surface, Solid Wood (Butcher Block), Stainless Steel, and More…
• Designed for Many Applications:
  • General Use…
  • Food Preparation
  • Cleanrooms…

This model is part of the RDM Industrial Carts standard models.

The post Cart Model <span style="color: #006ab6;"><strong>MC-107P-SS-PTCSTR</strong></span> – Stainless Steel Cart w/ Hydraulic Lift & Part-Time Casters appeared first on RDM Industrial Products.